Print Vendor
Instructions
How to use this file
Viking Operator’s Manuals
Paper Size: • 11x17
• Body - 50 lbs brilliant white offset or equivalent
Press: • Body - 1 color, 2-sided
• Cover imprint - 1 color, 1 or 2 sided (“Dear customer” letter can be
printed on the back side of the front cover)
Bindery: • Saddle stitch, face trim *if too thick for saddle stitch, tape bind
Covers: • FRONT COVER is present at the beginning of the file.
• BACK COVER is the page immediately after the front cover.
• The part number for this manual (typically a 17XXXXX number) is located
on the back cover.
Body: • Odd number pages are always right hand pages, even number pages are
always left hand pages.
General: • This instruction sheet is NOT part of the manual and must not be printed.
• Pages labeled “THIS PAGE INTENSIONALLY BLANK” are placement
pages and should NOT be printed.
If you have further questions on how to utilize this file, please contact
Simplicity Technical Publications Department 262-284-8647
To Next Page
Need help?
General
