Assembly
EN - 7
English
DeutschFrançais
For storage and transport reasons, some components of the tractor are not directly installed in the factory,
but have to be assembled after their removal from the packing. Final assembly is carried out by following these
simple instructions.
UNPACKING
When unpacking the tractor, take care to gather all individual parts and fittings.
FITTING THE SEAT
The standard packing contetnts: - tractor
- steering wheel
- seat
- mower deck
- wheels
- an envelope containing the Owner’s Manual, documents, washers, spacers,
e-rings, feather keys and caps, two starter keys, a pin for blocking the steering
wheel.
For transport reasons the lawntractor is supplied
without engine oil or fuel. Before starting up the
engine, fill with oil and fuel following the instructions
given in the engine Operator’s Manual
CAUTION
1
2
A B
To Next Page
Loading...
