EasyManua.ls Logo

Viking MT 830 - Regular Maintenance; Maintenance Schedule & Procedures

Viking MT 830
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 23
English
DeutschFrançais
Regular Maintenance
MAINTENANCE SCHEDULE & PROCEDURES
The following schedule should be followed for normal care of your tractor and mower.
Clean or replace exhaust screen every 50 hours.
* See the engine manufacturer's owner's manual.
** Change original engine oil after initial break-in period. Refer to engine owner’s manual.
*** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
Always refer to the engine manufacturer’s owner’s manual for specific engine information.
Before Every Every Every Every Spring
SAFETY ITEMS Each Use 5 Hours 25 Hours 100 Hours 250 Hours & Fall
Check Safety Interlock System l
Check Tractor Brakes l
Check Mower Blade Stopping Time l
Before Every Every Every Every Spring
NORMAL CARE ITEMS Each Use 5 Hours 25 Hours 100 Hours 250 Hours & Fall
Check Tractor/Mower for loose hardware l
Check Engine Oil Level * l ***l
Check / Change Engine Air Filter *, ***
Change Engine Oil *, **
Inspect Spark Plug(s) *
Check / Replace Fuel Filter l
Clean / Replace Exhaust Screen
Check Transmission Oil Level l
Lubricate Tractor & Mower ***l
Lubricate Rear Axle Shafts Yearly
Clean Battery & Cables l
Check Tire Pressure l
Clean & Sharpen Mower Blades l

Table of Contents

Related product manuals