Assembly
EN - 13
English
DeutschFrançais
The battery is situated in a compartment under the seat.
ACTIVATE THE BATTERY
Be careful when handling the battery. Keep flames
and sparks away from the battery.
When removing or installing battery cables, disconnect
the negative cable FIRST and reconnect it LAST. If not
done in this order, the positive terminal can be shorted
to the frame by a tool.
WARNING
Position the positive battery cable over seat switch har-
ness to prevent harness from becoming pinched in seat
pivot. Make sure that protective terminal cover is in place
over positive battery post. (See also Battery Installation
in the Regular Maintenance Section)
1. Remove the battery from the battery compartment.
2. Charge battery for 1 hour at 6-10 amps.
3. Reinstall the battery in the battery compartment.
4. First, connect the positive battery cable (B)
to the positive battery terminal (F). Slide the terminal
cover (G) into place. Second, connect the negative
battery cable (A) to the negative battery terminal (E).
C
B
E
A
D
C
F
G
FRONT
To Next Page
Loading...
