0478 131 9923 B - EN
80
2.1 General
This instruction manual constitutes
original manufacturer's instructions in
the sense of EC Directive 2006/42/EC.
VIKING is continually striving to further
develop its range of products; we therefore
reserve the right to make alterations to the
form, technical specifications and
equipment level of our standard
equipment.
For this reason, the information and
illustrations in this manual are subject to
alterations.
This instruction manual is protected by
copyright. All rights reserved, especially
the right of reproduction, translation and
processing using electronic systems.
2.2 Country-specific versions
VIKING supplies machines with different
plugs and switches, depending on the
country of sale.
Machines with European plugs are shown
in the illustrations. Machines with other
types of plug are connected to the mains in
a similar way.
2.3 Instructions for reading the
instruction manual
Illustrations and texts describe specific
operating steps.
All symbols which are affixed to the
machine are explained in this instruction
manual.
Planning routing of the perimeter
wire 117
Making a sketch of the mowing
area 118
Routing the perimeter wire 118
Connecting the perimeter wire 118
Wire clearances – use iRuler 118
Confined areas 120
Installing linking sections 120
No-go areas 121
Secondary areas 122
Corridors 122
Accurate mowing along edges 123
Sloping terrain in the mowing area 123
Installing reserve wire 124
Using wire connectors 124
Docking station 125
LED on the docking station 125
Notes on mowing 125
General 125
Mulching 125
Active times 126
Mowing duration 126
Operating the machine 126
Preparation 126
Flap 126
Adapting the programming 127
Automatic mowing 127
Mowing independently of active
times 127
Docking the robotic mower 128
Charging the battery 128
Maintenance 129
Maintenance schedule 129
Cleaning the machine 129
Checking the mowing blade wear
limits 130
Removing and installing the
mowing blade 130
Sharpening the mowing blade 131
Removing and installing carrier
plate 131
Finding a wire break 132
Power supply unit plug 133
Storage and winter break 133
Standard spare parts 134
Accessories 134
Minimising wear and preventing
damage 134
Environmental protection 135
Removing the battery 135
Transport 137
Lifting or carrying the machine 137
Securing the machine (lashing) 137
CE - manufacturer's declaration of
conformity 137
Technical specifications 138
Messages 139
Troubleshooting 143
Service schedule 146
Handover confirmation 146
Service confirmation 146
Installation examples 147
2. Notes on the instruction
manual
To Next Page
