What to do if the temperature display on my Viking Refrigerator does not match the set point?
If the temperature display on your Viking Refrigerator doesn't match the set point, it may be because the unit was just plugged in, hot food was recently added, or the door was opened for an extended time or frequently. Allow the unit to stabilize for 24 hours.
What to do if my Viking Ice Maker is not making ice?
If your Viking Ice Maker isn't producing ice, first ensure the On/Off switch is in the correct position. Then, check the electrical breaker to confirm it hasn't tripped. Also, if the “Check Water” light is flashing blue, examine the water supply. The ice maker checks for water every 20 minutes and will automatically restart when the water supply is restored.
What to do if the Viking Refrigerator ice maker will not operate or ice is not made fast enough?
To ensure your Viking Refrigerator's ice maker operates correctly or produces ice faster: * Check if the on/off lever is in the OFF (up) position; if so, lower it to the ON (down) position. * Verify the water valve is turned on and that water is reaching it; inspect the water line for any leaks. * Make sure the freezer is sufficiently cold by adjusting the temperature controls and waiting 24 hours for stabilization.
What to do if my Viking Grill rotisserie won't work?
If your Viking Grill rotisserie fails to operate, ensure the electrical cord is securely inserted into the outlet. Also, check if the circuit breaker is open or if a fuse has blown.
Why burner ignites but flame is large, distorted, or yellow on my Viking VESC30?
This issue may arise from several factors. The burner ports could be clogged, the unit might be using the wrong type of gas, or the air shutters might not be properly adjusted. Please check these potential causes.
Why broil does not work in Viking VESC30?
If broil does not work, it might be because the temperature control knob is rotated too far past the broil position.
What to do if igniters sparking but no flame ignition in my Viking VESC30 Ranges?
The gas supply might be interrupted, ensure that the gas supply valve is in the “ON” position.
What to do if Viking Cooktop igniters spark but no flame?
If the igniters on your Viking Cooktop are sparking but the flame won't ignite, first, check that the gas supply valve is in the “ON” position. Also, verify that there are no interruptions to the gas supply.
How to fix Viking Cooktop igniters that won't work?
If the igniters on your Viking Cooktop won't work, there are a few things to check: * Make sure the circuit hasn't tripped and reset it if needed. * See if a fuse has blown and replace it. * Confirm that the cooktop is properly connected to a power source.
What to do if my Viking Refrigerator ice maker will not operate?
If your Viking Refrigerator ice maker isn't working, verify that the freezer is cold enough to make ice, which may take overnight to reach the proper temperature. Ensure the signal arm is in the on (down) position, the water valve is turned on, and water is getting to the water valve. Check the water line for leaks.
To Next Page
General
