EasyManua.ls Logo

Viking VMOC206SS User Manual

Viking VMOC206SS
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
In the interest of user-safety the oven should be restored to its original condition and only parts identical to those specified should
be used.
WARNING TO SERVICE PERSONNEL: Microwave ovens contain circuitry capable of producing very high voltage and
current. Contact with the following parts may result in a severe, possibly fatal, electrical shock. (Inverter unit that includes
High Voltage Capacitor, High Voltage Power Transformer, High Voltage Rectifier and Heat sink etc., and Magnetron, High
Voltage Harness etc..)
TABLE OF CONTENTS
Page
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO
AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY .......................................................... 2
BEFORE SERVICING ............................................................................................................................................ 2
WARNING TO SERVICE PERSONNEL ................................................................................................................. 4
MICROWAVE MEASUREMENT PROCEDURE (Canada) ..................................................................................... 5
MICROWAVE MEASUREMENT PROCEDURE (USA) .......................................................................................... 6
FOREWORD AND WARNING ............................................................................................................................... 7
PRODUCT SPECIFICATIONS ............................................................................................................................... 8
GENERAL INFORMATION.................................................................................................................................... 8
OPERATION ......................................................................................................................................................... 10
TROUBLESHOOTING GUIDE ............................................................................................................................. 16
TEST PROCEDURE ............................................................................................................................................ 18
COMPONENT REPLACEMENT AND ADJUSTMENT PROCEDURE................................................................. 26
PICTORIAL DIAGRAM ......................................................................................................................................... 33
PARTS LIST ........................................................................................................................................................ 34
PACKING AND ACCESSORIES .......................................................................................................................... 39
S11M327MOC206
SERVICE MANUAL
This document has been published to be used for after
sales service only.
Range Corporation
111 Front St., Greenwood, MS 38930
Tel: (888) 845-4641
Above model is example only
MICROWAVE OVENS
MODELS
VMOC206LE
VMOC206MJ
VMOC206PM
VMOC206VB
VMOC206CB
VMOC206RR
VMOC206CW
VMOC206OG
VMOC206GM
VMOC206SE
VMOC206PL
VMOC206SS
VMOC206BK
VMOC206WH
VMOC206IB
VMOC206BT
VMOC206SG
VMOC206GG
VMOC206BU
VMOC206MS
VMOC206TP
VMOC206SA
VMOC206AR
VMOC206CH
Question and Answer IconNeed help?

Do you have a question about the Viking VMOC206SS and is the answer not in the manual?

Viking VMOC206SS Specifications

General IconGeneral
BrandViking
ModelVMOC206SS
CategoryMicrowave Oven
LanguageEnglish

Summary

PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY

BEFORE SERVICING

Procedures to follow before commencing service work on the oven.

DANGER CAUTION HIGH VOLTAGE

Warning about severe electrical shock hazard from high voltage components.

WARNING TO SERVICE PERSONNEL

Before Servicing

Steps to disconnect power and discharge capacitor before servicing.

After repairing

Steps to reconnect power and check functions after repair.

MICROWAVE MEASUREMENT PROCEDURE (CANADA)

Leakage test with enclosure installed

Procedure for measuring microwave leakage with the oven enclosure fitted.

Leakage test without enclosure

Procedure for measuring microwave leakage with the oven enclosure removed.

MICROWAVE MEASUREMENT PROCEDURE (USA)

Preparation for testing

Steps to prepare the oven and equipment for leakage testing.

Leakage test

Procedure for measuring microwave leakage with the oven enclosure fitted.

No Load Test

Procedure for measuring microwave leakage without a test load.

FOREWORD AND GENERAL INFORMATION

WARNING

Critical safety warnings for operating the oven.

DANGER

High voltage danger warnings for service personnel.

SPECIFICATIONS AND GROUNDING

GROUNDING INSTRUCTIONS

Importance and procedure for grounding the appliance.

OPERATION SEQUENCE

SPECIFIC COOKING MODES

CONVECTION COOKING CONDITION

Operation sequence for convection cooking modes.

AUTOMATIC MIX COOKING CONDITION

Operation sequence for combined microwave and convection cooking.

SENSOR COOKING CONDITION

Operation sequence for food cooking based on sensor detection.

ADVANCED COOKING FEATURES

FIRE SENSING FEATURE (MICROWAVE MODE)

System that stops oven operation if a fire is detected in the cavity.

COMPONENT FUNCTIONS AND DESCRIPTIONS

CONVECTION SYSTEM AND TROUBLESHOOTING

TROUBLESHOOTING GUIDE

General guide for diagnosing and resolving oven problems.

TEST PROCEDURES: ELECTRICAL COMPONENTS

MAGNETRON ASSEMBLY TEST

Procedure to test magnetron filament, chassis ground, and power output.

POWER TRANSFORMER TEST

Procedure to measure primary and high voltage coil resistance.

HIGH VOLTAGE RECTIFIER TEST

Procedure to test the high voltage rectifier for shorts or opens.

TEST PROCEDURES: SWITCHES AND FUSES

PRIMARY INTERLOCK SWITCH AND THIRD DOOR SWITCH TEST

Testing the operation of primary interlock and third door switches.

SECONDARY INTERLOCK SYSTEM TEST

Testing door sensing switch and secondary interlock relay.

TEST PROCEDURES: THERMAL CUT-OUTS AND HEATING

HEATING ELEMENT TEST

Testing heating element resistance and insulation.

TEST PROCEDURES: NOISE FILTER AND CONTROL PANEL

TEST PROCEDURES: KEY UNITS AND RELAYS

TEST PROCEDURES: SENSOR AND PWB

SENSOR AND CONTROL UNIT DIAGNOSTICS

COMPONENT REPLACEMENT AND ADJUSTMENT

WARNING FOR WIRING

Essential safety precautions for wiring procedures.

HIGH VOLTAGE AND MOTOR COMPONENT REPLACEMENT

HEATER, LAMP, AND FAN COMPONENT REPLACEMENT

POWER CORD AND CONTROL PANEL REPLACEMENT

SWITCH REPLACEMENT AND DOOR ADJUSTMENT

DOOR ADJUSTMENT AND DISASSEMBLY

PARTS LIST

PARTS LIST (Continued)

PARTS LIST (Miscellaneous)

Related product manuals