Villager VBV 230 E - Page 28

9
Villager
VBV 230 E (GB)
Fig 9
ON/OFF switch
Fig 10
Close
Fig 11
Fig 12
4. Insert the connector pipe into the side
opening of the vacuum bag. Wrap the
Velcro strap around the bag and pipe to
secure the bag in place. Place the shoulder
strap over your left shoulder and adjust the
Shoulder Strap Adjustment as necessary
(Fig.9).
STARTING / STOPPING
STARTING INSTRUCTIONS
1. Fill the fuel tank with the amount of
Fuel/oil mixture needed for the job.
2. Turn switch to (ON of "ON/OFF")
(Fig.10).
3. ONLY FOR COLD ENGINE START
Pull the choke to the fully extended position so
that the choke is closed (Fig.11).
4. Press and release the primer bulb 7-10
times until it is full of fuel (Fig.12).