Villeroy & Boch 92233500 User Manual

INWALL CISTERN CARE AND INSTALLATION GUIDE
Installaon instrucons for 92233500 - WC-Element 1120 mm
Technical Hotline Customer Central support@customer-central.com.au
1800 356 717 1300 364 748 www.argentaust.com.au
PM.192.23..0000 Version: 24092018
1. INSPECT ALL PARTS PRIOR TO INSTALLATION FOR SUITABILITY AND/ OR DEFECTS
2. ANY SUSPECTED DEFECT SHOULD BE REPORTED AS SOON AS POSSIBLE
3. SHOULD ANY PRODUCT BE INSTALLED DESPITE A FAULT HAVING BEEN FOUND AND
REPORTED, IT WILL NOT BE ACCEPTED LIABILITY FOR THE COST OF LABOUR TO REMOVE AND
INSTALL ANY REPLACEMENT PRODUCT/S
DN 50
[mm]
± 0
8 x 70
10
12
4x
M 10
1
,0 m
0211
536
032
635
50
mind. 95
033
051-0
563
230
180
DN 90
DN DN90 100/
a = 140 mm
b = 200 mm

Villeroy & Boch 92233500 Specifications

General

Brand	Villeroy & Boch
Model	92233500
Category	Toilets
Language	English

Summary

Installation Instructions Overview

Pre-Installation Checks and Reporting

Inspect all parts for suitability and defects. Report any suspected defects immediately.

Liability for Faulty Installation

No liability accepted for labour costs if product is installed despite a fault.

Installation Requirements and Warranty Conditions

Qualified Installation and Regulations

Product must be installed by a qualified person per local regulations and manufacturer specs.

Water Pressure and Pipe Sizing

Inlet valve water pressure and pipe sizing must comply with AS3500-4 and manufacturer specifications.

Warranty Validity and Support

Warranty is valid if installed per instructions; proof of purchase and contact for service are required.

Service

Service and Maintenance Steps

Illustrates various service and maintenance procedures for the cistern components.

Care and Maintenance

Daily Cleaning Recommendations

Use a soft, non-abrasive sponge or cloth for daily cleaning.

Spare Parts Breakdown

Detailed list and diagram of available spare parts for the cistern.