Need help?Do you have a question about the Villeroy & Boch 9M30U101 and is the answer not in the manual?
General| Product Name | Villeroy & Boch 9M30U101 |
|---|---|
| Category | Toilets |
| Material | Ceramic |
| Shape | Oval |
| Color | White |
Read instructions, leave them for customer, remove existing seat, and inspect new product.
Alerts about potential operating errors causing injury or property damage, and specific warning against overtightening.
Illustration of included parts and required tools for installation.
Install the mounting elements (A) into the toilet bowl holes (B).
Tighten screws enough to allow for adjustments, but not fully secure.
Attach the seat hinges to the mounting elements with an audible click.
Position and adjust the seat correctly on the bowl before final tightening.
Firmly tighten screws and cover with supplied chrome caps.
Release the seat from the hinge pins by pressing the buttons.
Re-attach the seat to the toilet bowl ensuring it clicks into place.
Use mild pH neutral soap; avoid abrasive or chlorine-based cleaners to prevent damage.
Rinse with clear water if contact with aggressive cleaners occurs, then dry with a soft cloth.
Keep seat and cover open during bowl cleaning until agents are flushed.
To Next Page
