Viltrox JY-710 - Timed Photography (7;7) - Camera Integration; Using Camera Settings for Shutter Speed; Timer Battery Check

To Next Page

To Previous Page

1 3

* Select “release priority” if available.

** When using autofocus, choose an interval at least two seconds longer than the camera

shutter speed to allow the camera time to focus. When using long exposure noise

reduction (available with some digital cameras), choose an interval at least double the

camera shutter speed.

Timed Photography (7/7)

Before using the timer for extended periods,

check that the batteries have enough charge.

Replace the batteries when the low battery

indicator ( ) flashs in the show panel( ).

JY-710

Any

Off

（continuous- servo autofocus）* or （manual）

（single frame）

（manual）or

（shutter- priority auto）

Longer than camera shutter speed**

To take photographs at the shutter speed selected with the camera, adjust settings as follows:

Camera

Using the timer

Using the camera to Select shutter speed