5
Pair of buttons for flat control with EnOcean module
The pair of buttons, suitably hooked onto the flat control with two rocker push buttons, permits obtaining the lighting point by radio
through which it is possible to carry out all the functions of automation (lights, roller shades, scenes, etc.) in a similar manner to the
conventional By-me control appliances.
IMPORTANT: The buttons can be specially customized with any symbol.
The pair of buttons can be supplied in the following versions:
20506: 2 Eikon modules
19506: 2 Arkè modules
14506: 2 Plana modules
Pair of buttons for flat control with EnOcean module
Technical characteristics
• Rated supply voltage (Vn): no kind of power supply is needed.
• Operating temperature: -5 - +45 °C (for indoor use)
• Transmission frequency: 868 MHz
• Installation: flush or surface mounting. Surface mounting installation, thanks to the special mounting frame (art. 21507, 20507, 19507,
20607, 14607), can be on materials such as, for instance, wood, masonry, etc.
• Capacity: 70 m in an open field; this value is less when there are walls and/or metal partitions. Before installing the device, always
take care to check the strength of the radio signal.
IMPORTANT: When the button is pressed, for the radio control to be transmitted, you must hear a mechanical “click”.
The flat control with the EnOcean module with two rocker push buttons, art. 20505, is supplied in the 2-module version.
20505
Eikon
Plana
Arké
To Next Page
Loading...
Need help?
General
