Telecamere Wi-Fi
11
IT
EN
3 - Rilevazione movimento
Quando viene rilevato un movimento, un messaggio di allarme con snapshot
verrà inviato sullo smartphone, segnalato da una notica.
a - Impostazione Rilevamento di Movimento: fare clic sulla parte superiore
destra "
...
" per accedere a più impostazioni.
b - Fare clic su "Notiche di rilevamento", attivarlo e impostare il livello di
sensibilità. Oppure, nel caso di telecamera a batteria, attivare il sensore PIR,
modicare la sensibilità di rilevamento e per ridurre i falsi allarmi, attivare la
funzione di Rilevamento persona.
3 - Motion detection
When motion is detected, an alarm message with a snapshot will be sent to your
smartphone, signalled by a notication.
a - Detection Alert Setting: click on the top right "
...
" to access more settings.
b - Click on "Motion detection", activate it and set the sensitivity level.
Otherwise, in the case of a battery camera, activate the PIR sensor, modify the
detection sensitivity and to minimise false alarms, activate the Person detection.
2022-11-04 15:39:45
2 KB/S
Aree di sorveglianza
Per migliorare il rilevamento e ridurre i falsi allarmi, è possibile abilitare la Regione
di attività in modo da eettuare il rilevamento solo in alcune aree della ripresa.
Impostare l'area in "Seleziona area di sorveglianza", modicare l'area e spostarla
nella posizione desiderata, salvare le impostazioni.
Utilizzare il tasto "+" per aggiungere no ad un massimo di 4 aree.
NOTA: Per le telecamere PT, quando si impostano le aree di sorveglianza si
consiglia di disattivare le funzioni di Tracking e richiamo preset.
Surveillance areas
To improve detection and reduce false alarms, you can enable "Activity Region"
to detect only certain areas.
Set the area in "Surveillance Area setting", edit the area and move it to the
desired position, save the settings.
Use the "+" key to add up to a maximum of 4 areas.
NOTE: For PT cameras, when setting up the surveillance areas, it is recommended
to turn o the Tracking and preset recall functions.
2022-11-16 09:33:50
Drag/Resize the red frame to set activity region
Cancel
Save
area4area3area2area1