Why is motion detection not working on my Vimar Elvox TVCC 46613.036 Security Camera?
If the motion detection feature on your Vimar Security Camera isn't activating, verify that 'MOTION DET' is set to 'ON' in the menu settings. Also, confirm that the 'MD AREA' has been properly defined within the settings.
What to do if the image on my Vimar Security Camera screen flickers?
If the image on your Vimar Security Camera screen is flickering, ensure that the camera is not pointed directly at sunlight or fluorescent lighting. If the flickering persists, try repositioning the camera.
Why is the image on my Vimar Security Camera so dim?
If the image on the screen of your Vimar Security Camera appears dim, first, check if the camera lens or the lens glass is dirty. If so, clean the lens or glass with a soft, clean cloth. If the issue persists, adjust the monitor controls as needed. Also, reposition the camera if it's facing a very strong light, and adjust the lens focus.
How to fix a dark image on my Vimar Security Camera?
If the image on your Vimar Security Camera screen is dark, adjust the contrast control on the monitor. If you're using an intermediate device, make sure the 75?/Hi-z is set correctly.
How to adjust the color on my Vimar Elvox TVCC 46613.036 Security Camera?
If the color of the picture from your Vimar Security Camera is not correct, check the settings in the WHITE BALANCE menu.
Why doesn't SENS-UP work on my Vimar Elvox TVCC 46613.036 Security Camera?
If the SENS-UP function isn't working on your Vimar Security Camera, first check that the AGC setting in the EXPOSURE menu is not set to OFF. Also, verify that the SHUTTER setting in the EXPOSURE menu is set to the correct value (---).
What to do if my Vimar Elvox TVCC 46613.036 Security Camera is hot and not working?
If your Vimar Security Camera is not working properly and the surface is hot, make sure the camera is correctly connected to an appropriate regulated power source.
How to troubleshoot a Vimar Security Camera when nothing appears on the screen?
Check the power cable and the power supply output. Also, verify the video connection between the Vimar Security Camera and the monitor.
How to adjust lens settings like brightness and mode for optimal viewing.
Configuring shutter speed, AGC, Sense-Up, BLC, and D-WDR for image quality.
Setting white balance for accurate color reproduction in different lighting conditions.
Configuring color/monochrome modes based on ambient light conditions.
Utilizing 3D Noise Reduction to improve low-light image clarity.
Details on Cam Title, D-Effect, Motion, Privacy, and Defect settings.
Guide to adjusting sharpness and monitor settings for image clarity.
Procedures for resetting the camera to factory defaults and exiting the setup menu.
General| Category | Security Camera |
|---|---|
| Focal Length | 2.8 mm |
| Night Vision | Yes |
| Weatherproof | IP66 |
| Model | 46613.036 |
| Power Supply | 12V DC |
To Next Page
