◆ EXT : It can change the color or B/W mode automatically through the connection with the
ground terminal.
3DNR
SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
AUTO
ON
This function makes the noise of the low light background decrease and is the most highlighted
feature using 3D-DNR DSP chip.
1. Move the triangular indicator to 3DNR by using the Up or Down button.
2. Select the mode to use by pressing the Right or Left button.
3. Adjust the most available proportion of compensation with the ambient environment by changing
the 3DNR mode into On and pressing the Set button.
◆ Off : Deactivated status.
◆ On : The compensation proportion is from 0 to 200.
The excellent effect of noise decrease in the low light condition.
3DNR
LEVEL
RETURN
200
RET
IIIIIIIIII IIIIIIIIII|
NOTE
* If 3DNR function is used, the cancellation effect of noise is excellent. The higher the
compensation proportion raise, the better the effect of noise cancellation is, but the
ghost effect may be occurred.
18
CCTV
EN
To Next Page
Loading...
