3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
This function is to adjust the brightness of the monitor.
1. Move the triangular indicator to LENS using the Up and Down buttons on the
Set Up menu screen.
2. Select the desired lens type by pressing the Left of Right button.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol displayed “---“.
Lens
SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DCAUTO
ATW
AUTO
ON
11
CCTV
EN
To Next Page
Loading...
