Do you have a question about the Vimar ELVOX 46316.210 and is the answer not in the manual?
Brand | Vimar |
---|---|
Model | ELVOX 46316.210 |
Category | Security Camera |
Language | English |
Alerts to risk of electric shock and need for qualified service for internal parts.
Details FCC/CE compliance for commercial environments and potential interference.
Warns against unauthorized modifications and advises on preventing fire/shock hazards.
Filters noise using adaptive 2D and 3D filters for improved image clarity.
Provides superior surveillance conditions compared to standard VGA cameras.
Enhances image clarity in poor conditions like fog, smoke, or rain.
Masks strong light sources to improve visibility of other subjects.
Advises against extreme temperatures, high humidity, and unstable lighting.
Warns against touching the lens, pointing at strong light, dropping, or exposing to liquids.
Caution against exposing the camera to rain, liquids, or radioactivity.
Specifies installation by qualified personnel and use of approved power supplies.
Guides on careful handling and cleaning without abrasive detergents or direct sun exposure.
Describes different types of OSD buttons (A, B, C) and the optional wired remote controller (D).
Explains how to configure lens settings, choosing between DC or Manual Iris.
Details how to adjust brightness, shutter speed, SENS-UP, and AGC for optimal exposure.
Covers BLC and HLC functions to improve image quality in difficult lighting conditions.
Configures the camera's automatic or manual switching between color and B/W modes.
Explains ATW, AWB, PRESET, and MANUAL modes for color temperature adjustment.
Details Digital Noise Reduction levels to improve picture quality in low light.
Adjusts sharpness, gamma, color gain, mirror, flip, digital zoom, WDR, and shading.
Allows setting up privacy zones to mask specific areas on the screen.
Configures sensitivity, area, and alarm settings for detecting movement.
Sets color space, frame rate, CVBS format, and factory reset options.
Describes how to save settings and exit the setup menu.