NOTE
* The WDR function might lead to a reduced framerate and “ghost” effects in areas with
very bright background.
Day / Night
Here you can choose different settings to control the DAY&NIGHT function.
COLOUR: The camera is always in colour mode regardless of the ambient conditions.
B/W: The camera is always in Black & White mode regardless of the ambient conditions.
EXTERN: Here you can activate the EXTERN function to activate the external Day & Night
connector on the rear panel of the camera. If you select EXTERN, a submenu appears where
you can make finer adjustments.
- DELAY [MIDDLE, HIGH, LOW]: Set the delay time for switching between COLOUR and B/W.
AUTO: The camera will automatically switch between DAY and NIGHT mode, according to the
lighting condition. If you press the SET key, the AUTO sub-menu is selected.
MENU
LENS
EXPOSURE
BACKLIGHT
DAY / NIGHT
WHITE BAL
DNR
IMAGE
MOTION
SYSTEM
EXIT
DC
OFF
AUTO
ATW
MIDDLE
OFF
DAY / NIGHT
ANTI SAT.
AGC THRES
MARGIN
DELAY
RETURN
10
8
10
LOW
IIIIIIIIIIIIIIIIIII
||
IIIIIIIIIIIIIIIIIII
||
IIIIIIIIIIIIIIIIIII
||
|
|
|
15
TVCC
EN
To Next Page
Loading...
