◆ Sharpness : The outline of an image becomes sharp and more distinct as the level of
sharpness increases.
It had better be used to adjust the value to the proper one according to the kind of an image.
◆ Monitor : Change the setting value which is suitable for the monitor.
→ LCD : Select this when you use the LCD monitor.
(You can adjust the Gamma, Level, Blue& Red Gain on the submenu)
→ CRT : Select this when you use the CRT monitor.
(You can adjust the Level, Blue & Red Gain on the submenu)
→ USER : Use this unless you adjust two values above. If you use the monitor which
don’t have a good contrast rate, get into the submenu and adjust the Gamma, Level,
Blue & Red Gain in the submenu.
Reset
Exit
The camera is set to the Factory Default value.
Press the Set button in the exit menu to save the current settings and exit the Set Up menu.
ADJUST
SHARPNESS
MONITOR
RETURN
25
LCD
RET
IIIIIIIIII IIIIIIIIII|
24
CCTV
EN
To Next Page
Loading...
