- Sense Up : To eliminate defect, set the high level of Sense Up. You can set to max. 64x,
but 32x is the best setting value to eliminate defect.
- DIFF : You can set the size of DEFECT from 0 to 3.
- THRESHOLD
- START : Press Set button on the “<” mark, It will start to eliminate defects
“PROCESSING NOW…” sentence will be displayed on the monitor.
- Return : Save the setting value of this menu, return to the SPECIAL menu.
◆ DEFOG : This function helps to recognize the object in a foggy or dusty weather condition.
◆ LANGUAE : The menus can be changed in real time in the selected language.
(ENGLISH/KOREAN/ JAPANESE/CHINESE/RUSSIAN/FRANCAIS/ESPANOL/ITALIANO/
PORTU/DOUTCH/GERMAN/POLISH/TURKI/ HEBREW/ARAB)
◆ Return : Save the setting value and get out of the current menu.
DEFOG OFF DEFOG ON
Adjust
SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
AUTO
ON
This function is needed to control the brightness of the monitor.
1. When the Set UP menu is displayed, select ADJUST using the Up and Down button.
2. Select the desired mode by using Up or Down button.
23
CCTV
EN
To Next Page
Loading...
