◆ COLOR : Making the video output color always.
◆ B / W : Making the video output B/W always. By selecting the color signal On or Off,
this lets the burst signal be disappeared or not.
◆ Auto : Automatically, It shifts into the color mode in the bright environment and the B/W
mode in the low light condition. It can adjust the delay time, starting brightness and end
brightness according to the ambient conditions by pressing the Set button.
Day&Night
SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
AUTO
ON
You can change the color mode of color or black / white by setting up the mode.
1. Select Day&Night using the Up or Down button on the Set Up menu screen.
2. Select the desired mode using the Left or Right buttons.
DAY&NIGHT B/W
DAY&NIGHT AUTO
BURST
IR SMART
RETURN
DELAY
D → N(AGC)
N → D(AGC)
RETURN
OFF
ON
RET
5
60
20
RET
IIIIIIIIII IIIIIIIIII|
IIIIIIII IIIIIIIIIIII|
IIII IIIIIIIIIIIIIIII|
17
CCTV
EN
To Next Page
Loading...
