Vimar ELVOX 46316.210 - Page 41

ATW (Auto Tracking White Balance):
With the Auto Tracking White Balance function, the white balance in a scene will be
automatically adjusted while temperature colour is changing. The ATW Mode is suitable for
environments with a light source having a colour temperature in the range roughly from
1800 ~ 10500K.
AWB (Auto White Balance):
In this mode, white balance works within its colour temperature range. This mode computes
the white balance value output using the colour information from the entire screen. It outputs
the proper value using the colour temperature radiating from a black subject.
PRESET:
This mode is set to the current white balance condition and keeps its value. Select this mode
and then press the SET key. If there is a change in location or light source, please repeat this
procedure.
MANUAL:
Can be used for fine adjustment. Set the White Balance by first using ATW or AWC and then
change to MANUAL and press the SET key. Increase or decrease the value of R-Gain (Red)
and B-Gain (Blue) while monitoring the colour of the image.
- R-GAIN: Adjusts the White Balance for the colour Red.
- B-GAIN: Adjusts the White Balance for the colour Blue.
MANUAL
R-GAIN
B-GAIN
RETURN
15
10
IIIIIIIIIIIIIIIIIII
||
IIIIIIIIIIIIIIIIIII
||
17
TVCC
EN