1
SL24.D
EN
1 - Product characteristics
Control unit for governing sliding gear motors at 24 Vdc with a maximum power of 80 W, equipped with an encoder interface to detect obstacles and
control the speed, and an integrated 433 MHz receiver.
The control panel:
- can customize the slow-down distance and speed for both opening and closing
- has an obstacle detection system
- has LEDs input diagnostics and programming
- has a removable radio memory
- has an integrated receiver with a capacity of 200 remote controls (hard-coded or rolling-code)
- has current control to protect the electric motor
Tecnichal characteristics
Supply 230 Vac
Motor power supply 24 Vdc
Maximum motor power 160 W
Output for flashing light 24 Vdc 10 W max
Accessories power supply 24 Vdc 500 mA
Receiver memory 200 remote controls
Receiver frequency 433 MHz
Remote controls code Rolling code or fixed
Fuse F1 (line protection) ATO 15 A
Fuse F2 (accessory protection) 5x20 mm F3.15 A
Operating temperature -10 ÷ +50°C
Controllable actuators
Ref. Description
ESM2.D ACTO 600D sliding operator 24 V 600 kg, display electronic control card
2 - Example of installation
A
D
F
E
4x0.5 mm²
2x0.5 mm²
D
G
H
G
H
2x1 mm²
3x0.5 mm²
4x0.5 mm² 2x0.5 mm²
3x1.5 mm² (230 Vac)
Components for implementing a complete system
Main Components Accessories (optional)
Description Ref. Description Ref.
Actuator A Post-mounted photocells G
Blinking B Posts H
Wall-mounted photocells D
Key selector E
Rack F
B
To Next Page
Loading...
Need help?
General
