Vimar ELVOX K40540.E User Manual (English)

Need help?

Do you have a question about the Vimar ELVOX K40540.E and is the answer not in the manual?

Vimar ELVOX K40540.E Specifications

General

Category	Intercom System
Model	K40540.E
Brand	Vimar ELVOX
Type	Video Intercom
Mounting	Wall-mounted
Colour	White
Camera	Yes
Night Vision	Yes
Operating Voltage	24V DC
Housing Material	Plastic
Display	LCD
Wiring system	2-wire

Summary

Package Contents

Key Kit Components

Identifies main components: entryphone, panel, electronic unit, power supply.

Dimensional Data

Component Dimensions

Provides measurements for various product parts.

Installation Guide

Installation Warnings

Cautionary notes on proper installation and handling.

Installation Possibilities

Mounting Options

Details on surface, box, and desktop installation methods.

Technical Specifications

Electrical and Environmental Data

Presents absorption, temperature, and protection rating.

Button and Signal Functions

Default Button Operations

Describes primary functions of device buttons.

LED Indicators and Signals

Explains the meaning of various LED status lights.

Unit Configuration and Terminals

Connection Terminal Blocks

Details on unit connection terminals.

Bus Termination and Jumper Settings

Configuration of the Due Fili Plus bus.

Volume, DIP Switch, and Trimmer Settings

Settings for volume, DIP switches, and trimmers.

Entrance Panel

Entrance Panel Dimensions and Specs

Details on the 40141/40142 entrance panel.

Electronic Unit

Electronic Unit Dimensions and Installation

Information on the 40131 electronic unit.

Installation Diagrams

Box Types for Installation

Guidance on using flush vs. surface mounting boxes.

Wiring Connections

Illustrates example wiring connections.

Microphone Housing Installation

Microphone Installation Steps

Step-by-step guide for microphone insertion.

Unit 40131 Component Identification

Terminal Block Identification

Labels for the unit's terminal blocks.

Programming and Audio Components

Identification of connectors and audio parts.

DIP Switch Configuration

Master/Slave ID Settings

Configuration of device ID as Master or Slave.

CA Terminal Mode Settings

Setting the CA terminal mode (CA or PA).

Configuration Procedures

Lock Activation Time Adjustment

Procedure for adjusting lock release timing.

Talk/Response Time Adjustment

Procedure for adjusting conversation timing.

Button Remapping

Procedure for changing button functions.

Reset and Default Configuration

Device Reset Procedure

Instructions for resetting the device to defaults.

Power Supply Unit 40100

Power Supply Specifications

Technical data for the 40100 power supply.

Connection Diagram

Power Supply Wiring

Diagram showing power supply unit connections.

Installation Rules and Safety

Regulatory Compliance

Details on EMC, RoHS, REACH directives.

WEEE Disposal Information

Guidance on product end-of-life disposal.

Wiring Diagrams

Single/Two-Family System Wiring

Wiring diagram for a standard system setup.

Wiring Configuration Variants

Indoor Station Configurations

Wiring for different indoor station modes.

Landing Call Button Connection

Wiring for the landing call button.

Programmable Output Variants

Open Collector Output Details

Information on the Open Collector output.

12V Output Details

Information on the 12V output.

Initial Setup and ID Configuration

Primary ID Setup

Procedure for setting the primary device ID.

Secondary ID Setup

Procedure for setting secondary device IDs.

User Warnings and Information

Important User Warnings

Critical safety and operational advice for users.

Related product manuals