Do you have a question about the Vimar Elvox Petrarca Series and is the answer not in the manual?
Lists terminals for BUS, call, ringtone, power supply, and monitors.
Describes how to adjust call volume using connectors or an accessory.
Covers wall-mounted, desktop, and monitor combination installations.
Explains the BUS termination connector for video signal stabilization.
Step-by-step guide to program the identification code via an entrance panel.
How to program secondary codes for multiple interphones in a group.
Details default functions for additional pushbuttons and programming options.
Procedure for programming pushbuttons for intercom calls between units.
Steps to program the self-start button for a specific panel.
How to reset specific pushbuttons to their factory default settings.
Procedure to erase all programmed settings from the device.
Details how calls from the entrance panel are generated and handled.
Explains how to make and receive intercom calls between units.
Describes the function of the 6153/682 accessory for call mute and denied call signals.
Explains the operation of the lock release button in various scenarios.