Vimar VIGAS series - VIGAS Boiler in Configuration with Gases Thermometer and Discharge Fan

12
Gasifying boilers VIGAS
Choose one option
+60 Discharge fan active for 60s. (Using when heating)
ON Boiler activation
⌧
Cancell the control
bc
Change the indicated value
If „+60“ is chosen, new graphical control is indicated. In left
corner is running time of discharge fan.
+60 Another 60s. could be added. 300s. maximum
ON Boiler activation
0 Discharge fan disconnection
bc
Change the indicated value
5.1.5 Disconnection the boiler (Automatically)
6. VIGAS BOILER IN CONFIGURATION WITH GASES
THERMOMETER AND DISCHARGE FAN
(without lambda sensor)
Advantages of gases thermometer are described in Chapt.5. Main advangate of discharge fan is
increased comfort during heating or adding fuel. When discharge fan is active during adding fuel
there is significant decrease of smudging into boiler-room. During the heating, discharge fan will
accelerate the burning.
6.1 VIGAS BOILER CONTROL
6.1.1 Boiler activation
When gases temperature drops under the set temperature
( end) boiler is switch-off automatically. „END“ will be indicated
on the display. By pressing „ENTER“ boiler will start operating
again.
If boiler is in unactive status with symbol „OFF“, as displayed on
the picture, by pressing the central button ENTER the boiler start
the operation.
By pressing „ “ adding fuel will be stopped. Fan will be switched
on automatically.