Need help?Do you have a question about the Vimtag P1 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ modes | Digital PTZ |
| PTZ control | Yes |
| Antenna type | Internal |
| Certification | CE, FCC |
| Antennas quantity | 1 |
| Placement supported | Indoor |
| Detachable antenna(s) | No |
| Connectivity technology | Wired & Wireless |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Streaming method | Multicast |
| Cabling technology | 10/100Base-T(X) |
| Ethernet interface type | Fast Ethernet |
| Interface | RJ-45/WLAN |
| Audio formats supported | AAC |
| Form factor | - |
| Mounting type | Desk |
| Product color | Black, White |
| Total megapixels | 3 MP |
| Maximum resolution | 1280 x 960 pixels |
| Supported video modes | 960p |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Video compression formats | H.264 |
| Supported graphics resolutions | 1280 x 960 |
| DC output current | 2 A |
| DC output voltage | 5 |
| Power consumption (typical) | 8 W |
| Pan range | 0 - 350 ° |
| White balance | Auto |
| Tilt angle range | 0 - 90 ° |
| Minimum illumination | 0.01 lx |
| Sustainability certificates | RoHS |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | -10 - 55 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Intelligent Video Surveillance (IVS) system features | Face detection |
| Digital zoom | 8 x |
| Fixed focal length | 6 mm |
| Maximum aperture number | 2.4 |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 512 GB |
| LED type | IR |
| Night vision distance | 10 m |
| Number of illumination LEDs | 2 |
| Minimum order quantity | 1 pc(s) |
Weight and Dimensions| Depth | 91 mm |
|---|---|
| Width | 90 mm |
| Height | 121 mm |
| Weight | 254 g |
Provides step-by-step instructions on how to add cameras and VimBoxes to your Vimtag account via the app or website.
Provides access to essential device information like model, software version, and device ID, along with system options.
Explains how to change the administrator password for individual cameras to enhance security.
Details how to create and manage guest accounts with limited access for sharing camera views.
Covers configuring network settings, including Ethernet and Wi-Fi connections, and viewing network status and IP information.
Details how to enable, format, and manage SD cards for video recording and storage on the camera.
Configures motion detection sensitivity and sets up alerts for when motion is detected in the camera's view.
Allows users to set specific times and days for receiving motion alerts, useful for monitoring inactive periods.
Provides common solutions for connectivity issues, including checking network connections, router restarts, and camera status.
To Next Page