Vimtag P1 - System Settings and Device Information

VIMTAG SURVEILLANCE SOLUTION USER GUIDE
Page 34
6. Overview of the Device Settings Page
In addition to being able to configure Account-related settings (see
Managing Your Account), you can also set many Device-related settings,
which are accessed by pressing the Settings icon ( ).
In the Device Settings page you can configure the following values for
each camera selected.
Note: The Settings page options vary slightly between the mobile
application and the non-mobile version used on a either a Windows or a
MAC computer. For more information on each option, click the link
below.
Option
Explanation
About
Provides information about your device.
Nickname
Set a user-friendly name for your device.
Device Admin Password
Change the Admin password.
Device Guest Password
Create a Guest password.
Network
Configure network settings.
OSD (On Screen Display)
Modify the on-screen display settings.
SD Card
Enable the use of an SD Card. You can also
format and unmount the SD Card.
Storage Device
Enable a VimBox for additional storage,
then enter the device ID and password.
Motion and Notification
Configure motion detection options and
notifications sent when motion triggers the
camera.