Others
Use the sliders to adjust the Speaker and the Microphone. You can make
the volume higher or lower with these sliders. Sliding to the right makes
the volume go higher, and sliding to the left makes it lower.
1. Speaker refers to the speaker on the camera, not on the microphone
you are using to speak. The speaker setting will determine the
volume of your voice when it comes out of the camera’s speaker.
2. Mic refers to the microphone that is on the camera. When you make
this louder, it increases the sound that you will hear when you are
watching a live feed and listening to what is happening in the
surroundings.
3. Flip is used when the camera is mounted upside down (for example,
when it is attached to a ceiling). It will flip the images viewed from
the camera (either snapshot or recordings) so that they appear
properly.
To Next Page
Loading...