VINCENT KP Series Operation & Maintenance Manual

Maintenance Checklist
KP-6 – KP-16
# from
Nomenclature
Drawing Item
Every
Shi Monthly
As
needed
Annu-
ally
1
Motor - Check for any blockage of fan from
dust
X X
2A
Gearbox Adapter - replace lubricator (if
equipped)
X
3 Gearbox - Test oil. Change if needed. X
4
Seal Plate Assembly - Lubricate one shot of
grease
X
4 Seal Plate Assembly - Look for leakage X X
5
Screw - Based on abrasiveness of product
and history, inspect for wear at discharge
X X
6
Screen - Based on abrasiveness of product
and history, inspect for wear at discharge
X X
9
Racing Ring (typically black UHMW) - Inspect
for wear or deformaon
X
10/21
Rocker Arm - Inspect for loose connecon or
bending
X
11
Air Cylinder - Inspect connecons and look
for leakage
X X
12
Tailstock Bushing - Lubricate, two shots of
grease. Check for wear at boom.
X X
14
Drive Collar (aka Clutch Collar) - Make sure
it's properly installed and locked onto screw
sha
X
15 Drive Pins (aka Cone Pins) - Look for wear X
16
4-Way Valve - Check air line connecons and
ease of movement
X
17
Air Regulator - Check air line connecons. If
equipped with lubricator, fill with oil.
X
18
Wheel Assembly - Lubricate and check for
wear
X
35

VINCENT KP Series Specifications

General

Brand	VINCENT
Model	KP Series
Category	Power Tool
Language	English