8.1. Operating DS20
8.1.1. Start UP - Turn Off
Press POWER button for a longer period of time to start the system. The display turns on and
several information is shown. To turn the system Off press POWER button for a longer period
of time once again. In case there is no activity longer than 5 minutes the system shuts down
itself.
8.1.2. Support level adjustment
The support level is changed by pressing the +or -button. There are 6 assistance levels.
These are 0assistance, 1, 2, 3, 4and 5assistance. When there is no bar highlited (1, 2, 3, 4,
5) the 0assistance is selected. The 0level means no motor support.
8.1.3. TRIP, ODO, AVG, MAX, CAD modes
Press MODE(i)button shortly to switch different modes. Press MODE(i)button repeatedly to
cycle through different modes.
- ODO - The distance ever travelled
- AVG - average speed reached
- MAX - maximum speed reached
- CAD - pedalling cadence
- TRIP - The distance travelled during the journey
note: once you are in a TRIP mode by pressing MODE button for a longer period of time the
TRIP information is reset to zero.
8.1.4. Display brightness
Press +button for a longer period of time to increase or decrease the backlight brightness of
the display.