Why is the evaporator icing up in my Vinotemp Wine Cooler?
If the evaporator is icing in your Vinotemp Wine Cooler, check for air flow restrictions. Also, check for sealed system leakage that could indicate refrigerant leaking. If these issues are not present, check for low side pressure, which could indicate a capillary tube blockage.
General| Type | Freestanding |
|---|---|
| Cooling System | Thermoelectric |
| Door Material | Glass |
| Voltage | 115V |
| Refrigerant | R134a |
| Finish | Black |
| Shelves | Wooden |
| Temperature Zones | Single Zone |
Guidance on selecting a suitable location for the cooling unit, considering exhaust and clearance.
Steps for physically mounting the cooling unit, including bracket and screw placement.
Guidelines for setting the desired temperature for optimal wine aging and during high ambient temperatures.
Detailed instructions on operating the digital controller, including display, commands, and alarms.
Identifying unit model and serial number, and locating key components for maintenance.
Instructions for cleaning the condenser coil to maintain performance and prevent issues.
Diagnosing and resolving issues when the cooling unit fails to start or operate.
Addressing the complaint of the fan operating non-stop and potential causes.
Troubleshooting inconsistent temperature control within the unit due to sensor issues.
Identifying causes for the unit's internal temperature being too high, such as seals or airflow.
To Next Page