3
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Foreword
This manual provides full and detailed maintenance and spare parts information for the Vinten
®
protouch Pro-
10 system, comprising a Pro-10 pan and tilt head, a Pozi-Loc tripod, floor spreader and case.
It is recommended that this manual is read carefully and the illustrations studied prior to operating or servicing
the equipment. Attention to the details contained herein will ensure that the equipment will operate efficiently
with the minimum of attention over a long service life. Particular attention must be paid to cleaning, especially
after use in adverse conditions.
To order spare parts or to obtain further information, application should be made to Vinten Broadcast Limited
or to your local distributor, or visit our website at www.vinten.com.
Associated Publication
protouch Pro-10 System Operators Guide
Publication Part No. 3809-8
WARNING!: Read the Safety Section on page 5 before using this pan and tilt head or
attempting any adjustment or repair.
NOTE: Information contained in this document is subject to change.
Vinten Broadcast Ltd reserves the right, without notice, to make changes in equipment
design or performance as progress in engineering, manufacturing or technology may
warrant.
To Next Page
Loading...
