Need help?Do you have a question about the Vinten Vision 100 and is the answer not in the manual?
Overview of the Vision 100 pan and tilt head for professional use.
Details the construction, features, and components of the Vision 100 head.
General operating information for the Vision 100 head.
Instructions for mounting the Vision 100 head onto a tripod or pedestal.
Guide for attaching a camera to the head, including optional adaptors.
Procedure to achieve perfect balance for smooth operation and stability.
How to apply and release the friction brakes on the pan and tilt axes.
Details on adjusting the drag settings for smooth pan and tilt movements.
General information on tools and materials for servicing.
Lists specific tools required for servicing, disassembly, and repair.
Details adhesives and lubricants needed for maintenance and assembly.
General information regarding servicing the Vision 100 head.
Instructions for cleaning the head to maintain serviceability and lifespan.
Essential checks to ensure proper operation and identify potential issues.
Guide for replacing the battery for the digital display and illumination systems.
Procedure for adjusting the pan and tilt brake knobs for optimal performance.
Steps to calibrate the digital display for accurate balance readings.
General information about the repair procedures for the head.
Detailed steps for dismantling the pan and tilt head components.
Procedure for removing and servicing the right-hand side plate.
Procedure for removing and servicing the head's balance mechanism.
Instructions for removing and servicing the pan drag mechanism.
Steps for removing and servicing the tilt drag mechanism.
Procedure for removing the outrigger assembly.
Steps for handling and installing electrical components.
Steps for reassembling the pan and tilt head components after repair.
Completing the assembly process after repair and reassembly.
Introduction to the parts list and its contents.
Guidelines for ordering replacement parts, including serial and part numbers.
List of part numbers for major assemblies of the Vision 100 head.
References to figures showing exploded views and component identification.
General| Purpose | Digital/film cameras |
|---|---|
| Material | Aluminum |
| Mounting | 3/8\ |
| Product color | Black |
| Number of legs | 3 leg(s) |
| Tilt angle range | -90 - 90 ° |
| Maximum weight capacity | 20 kg |
| Carrying case | Yes |
Weight and Dimensions| Height (max) | - mm |
|---|
To Next Page
