Need help?Do you have a question about the Vinten Vision 3 and is the answer not in the manual?
General| Type | Fluid Head |
|---|---|
| Pan Range | 360° |
| Base | 75mm Bowl |
| Base Diameter | 75 mm |
| Camera Fixing | 1/4" and 3/8" screws |
| Weight | 2.3 kg |
Explains warning symbols used in the guide for safety.
Details weight, dimensions, and load capacity of the head.
Covers tilt range, pan range, and tripod fixing method.
Provides contact details and website for additional support.
Details the process of mounting the Vision 3 head onto a tripod using its 75mm ball mount.
Guides on attaching a camera using the slide plate or VHS adaptor.
Instructions on how to check and achieve proper camera balance on the head.
Explains how to operate and use the pan and tilt brakes for locking the head.
Details how to adjust the pan and tilt drag using control knobs for smooth movement.
Outlines regular checks and tasks for maintaining the head's performance.
Provides instructions on how to clean the head, including notes on suitable cleaning agents.
Step-by-step guide for replacing the battery for the illuminated level bubble.
To Next Page