Vinten Vision 6 User Manual

Vinten
Camera Control Solutions
Operators Guide
Vision 6
Pan & Tilt Head

Vinten Vision 6 Specifications

General

Illuminated Spirit Level	Yes
Mounting	75mm bowl
Pan Range	360°
Camera Fixing	1/4" and 3/8"
Counterbalance	5-step

Summary

Safety - Read This First

Warning Symbols in this Operators Guide

Explains warning symbols and their meaning for personal injury or equipment damage.

Technical Data

Further Information

Associated Publication

Introduction to Vision 6 Head

Operation

Installing the Head on a Tripod

Details the procedure for mounting the head onto a tripod with a 75mm ball mount.

Mounting the Camera

Explains how to attach a camera to the head using the slide plate and mounting screws.

Mounting the Camera (VHS Adaptor)

Describes how to mount a camera using the optional VHS adaptor with a VHS pin.

Mounting the Camera (Optional Quickfit Adaptor)

Explains how to attach a camera using the Quickfit adaptor and wedge system.

Balancing the Head

Pan and Tilt Brakes

Pan and Tilt Drag

Servicing

Routine Maintenance

Lists checks for level bubble, drag, and brake controls during normal use.

Cleaning

Provides instructions for cleaning the head, specifying allowed and prohibited cleaning agents.

Battery Replacement

Describes the process for replacing the battery for the illuminated level bubble.

Brake Knob and Drag Control Knob Adjustment

Parts List