Need help?Do you have a question about the Vinten Protouch Pro-6HDV System and is the answer not in the manual?
General| Pan Range | 360° |
|---|---|
| Payload Capacity | 6 kg |
| Tilt Range | 90 degrees |
| Mounting | 75mm Bowl |
| Weight | 2.5 kg (5.5 lbs) |
| Material | Aluminum |
Details about an associated operator's guide for the system.
Explains how to navigate the document using interactive links and buttons.
Explains the meaning of WARNING! and CAUTION! symbols used in the manual.
Provides guidance on environmentally responsible disposal of the product and batteries.
Describes the intended use of the Pro-6HDV system and its load capacity.
Provides introductory information about the illustrated parts list.
Instructions on how to order replacement parts for the system.
Lists part numbers for major assemblies of the system.
Introduces the Protouch Pro-6HDV systems and their configurations.
Details the Pro-6HDV pan and tilt head's features like fluid drag, brakes, and mounting.
Explains balance range, selection, and the impact of C of G height on performance.
Describes the fluid drag system and brake function for smooth, controlled movements.
Instructions for assembling the tripod and spreader components.
Step-by-step guide to installing and adjusting the floor spreader.
Step-by-step guide to installing and adjusting the mid-level spreader.
Procedures for attaching a camera to the pan and tilt head.
How to balance the camera for optimal performance using the head's features.
Instructions on applying and releasing the pan and tilt brakes correctly.
How to adjust the pan and tilt drag for smooth, controlled movements.
Details on installing the optional carrying strap to the tripod.
Information on mounting the system on various OB and studio dollies.
Lists any special tools required for maintenance procedures.
Lists recommended greases, lubricants, and adhesives for servicing and repair.
General advice for maintaining the Protouch products for a long service life.
Instructions on how to clean the equipment, both indoors and outdoors.
Regular checks to ensure proper functionality of brakes, clamps, and indicators.
Step-by-step guide for replacing the battery for the illuminated levelling bubble.
Procedures for adjusting pan brake, tilt brake, and tripod leg clamps.
Detailed procedures for dismantling and assembling the pan and tilt head components.
Procedures for replacing tripod legs and clamp assembly components.
Procedures for dismantling and assembling the mid-level spreader's selector housing and leg assembly.
Introduces the parts list for the Protouch Pro-6HDV system.
Guides users on how to order spare parts for the system.
Lists the part numbers for the main assemblies of the system.
To Next Page