Vinten Protouch Pro-6HDV System - Pan and Tilt Head - Main Casting and Platform

50
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.2 Pro-6
HDV
Pan and Tilt Head - Main Casting and Platform
Item
No.
Part
No. Nomenclature Qty
1 PRO6PLV Camera plate for Pro-6
HDV
1
1.1 Screw, camera mounting, 1/4 in. BSW 1
1.2 Screw, camera mounting, 3/8 in. BSW 1
1.3 Slide plate 1
1.4 Plug, camera screw blanking 1
2 RV4018-2004 Assembly, camera platform 1
2.1 Screw, low-profile, socket, M5 x 12 mm long 2
2.2 Screw, low-profile, socket, M5 x 20 mm long 2
2.3 Platform 1
3 RS2002-2003 Assembly, camera slide clamp 1
3.1 Clamp knob 1
3.2 Side load clamp 1
3.3 Spring, side load clamp 1
3.4 Spring, side lock 1
3.5 Slide lock, side load 1
3.6 Release button, side load 1
3.7 Cover, side load 1
3.8 Screw, countersunk, pozidrive, M3 x 8 mm long 3
4 RV4018-2013 Assembly, pan drag knob 1
4.1 R503,222 Label, pan drag knob 1
4.2 Nut, M6, nyloc, full 1
4.3 Bearing, ball, thrust 1
4.4 Washer, M6, plain, large 1
4.5 Knob, pan drag 1
5 RV4018-2009 Centre cover moulding 1
6 R501,59 Assembly, pan drag adjustment 1
6.1 Threaded sleeve, pan drag adjustment 1
6.2 Bridge, pan drag adjustment 1
6.3 Clip, pan drag adjustment 1