Vinten Protouch Pro-6HDV System - Section 3: Tools and Materials; Special Tools Required; Consumable Materials List

24
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Section 3
Tools and Materials
Special tools
1 No special tools are required.
Consumable materials
2 The following consumable materials are required for certain procedures detailed in Sections 4 and 5.
NOTE: Adhesives and lubricants are not supplied and should be obtained under local
arrangements.
Item Use
AGIP PV (NLGI 2) grease (white) General lubrication
Kluberlub BE41-501 grease (black) General lubrication
Shell Darina R2 grease (yellow) General lubrication
Arexon TT163 General lubrication
Optalus A0 140 Pan and tilt friction
Chesterton 622 Tripod clamps
Loctite 221 (Vinten Part No. Z002-026) Screw locking
WARNING!: Always follow the recommended handling instructions supplied with each
consumable material product.