Vinten Protouch Pro-6HDV System - Fig 6.4 Pro

55
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.4 Pro-6
HDV
Pan and Tilt Head - Pan Drag and Ball Base
Item
No.
Part
No. Nomenclature Qty
1 R503,310 Assembly, centre housing 1
1.1 Sleeve, tilt bearing 1
1.2 Assembly, centre housing mechanism 1
1.3 Spring clip, level bubble 1
1.4 Level bubble 1
1.5 Sleeve, tilt brake 1
1.6 Sleeve, pan bearing 1
2 R503,355 Assembly, pan brake 1
2.1 RV4018-2014 Assembly, pan brake knob 1
2.2 Screw, countersunk head, socket, M 4 x 8 mm long 1
2.3 Knob, pan brake 1
2.4 Insert, pan brake knob 1
2.5 Shim, 8 mm ID x 14 mm OD x 0.30 mm thick 1
2.6 Spring, pan brake release 1
2.7 Clamp plate, pan brake 1
2.8 Bolt, dome head, coach, M 6 x 20 mm long 1
3 R3,2223 Bearing, pan 1
4 R501,56 Assembly, pan drag 1
4.1 Screw, cap head, socket, M 5 x 16 mm long 2
4.2 Drag disc, adjustable 1
4.3 Drag disc, fixed 1
4.4 Spring, drag 2
4.5 Shoe, drag disc adjustment 2
R116,23 Drag fluid, Optalus A0 140, 4.5 grams 1
5 RV4018-2006 Assembly, pan base spares 1
5.1 Sleeve, pan bearing 1
5.2 Assembly, pan base 1
5.3 Stud 1
6 R503,728 Assembly, Bowl clamp 1