3
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Foreword
This manual provides full and detailed maintenance and spare parts information for the Vinten
®
Protouch Pro-
6
HDV
system, comprising a Pro-6
HDV
pan and tilt head, a Pozi-Loc tripod, floor or mid-level spreader and case.
It is recommended that this manual is read carefully and the illustrations studied prior to operating or servicing
the equipment. Attention to the details contained herein will ensure that the equipment will operate efficiently
with the minimum of attention over a long service life. Particular attention must be paid to cleaning, especially
after use in adverse conditions.
To order spare parts or to obtain further information, application should be made to Vinten or to your local
distributor, or visit our website at www.vinten.com.
Associated Publication
Protouch Pro-6
HDV
System Operators Guide
Publication Part No. V4018-4980
WARNING!: Read the Safety Section on page 5 before using this pan and tilt head and
tripod or attempting any adjustment or repair.
NOTE: Information contained in this document is subject to change.
Vinten reserves the right, without notice, to make changes in equipment design or
performance as progress in engineering, manufacturing or technology may warrant.
To Next Page
Loading...
