Vinten pro-touch Pro-10 System - Page 41

41
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.2 Pro-10 Pan and Tilt Head - Main Castings and Platform
Item
No.
Part
No. Nomenclature Qty
1 3809-900SP Camera plate for Pro-10 1
1.1 Screw, camera mounting, 1/4 in. BSW 2
1.2 Screw, camera mounting, 3/8 in. BSW 2
1.3 Slide plate 1
1.4 Plug, camera screw blanking 1
2 R503-216 Assembly, lock lever 1
2.1 Screw, countersunk head, socket, M4 x 8 mm long 1
2.2 Knob, slide plate lock 1
2.3 Insert, slide plate lock 1
3 R516-08 Assembly, plate brake 1
4 R516-203 Assembly, top base 1
4.1 Screw, cap head, socket, M5 x 12 mm long 2
4.2 Screw, cap head, socket, M5 x 16 mm long 2
4.3 Platform 1
5 R503-212 Assembly, top friction control knob 1
5.1 Label, pan drag knob 1
5.2 Nut, M6, nyloc, lock 1
5.3 Bearing, ball, thrust, 6 mm ID x 14 mm OD x 4.7 mm long 1
5.4 Washer, plain, large, M6 1
5.5 Knob, pan drag 1
6 R516-205 Assembly, cover 1
6.1 Lid, battery compartment 1
6.2 Screw, csk head, socket, M4 x 8 mm long 2
6.3 Assembly, centre cover spares 1
7 R516-12 Assembly, balance 1
7.1 Threaded sleeve, pan drag adjuster 1
7.2 Screw, cap head, socket, M5 x 16 mm long 2
7.3 Bridge, pan drag ad 1
7.4 Clip, pan drag adj 1
8 R516-201 Assembly, right flange 1
9 R516-91 Assembly, nut+bearing+washer 1