46
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.4 Pro-10 Pan and Tilt Head - Pan Drag and Ball Base
Item
No.
Part
No. Nomenclature Qty
1 R516-206 Assembly, base casting 1
1.1 Assembly, bubble 1
1.2 Assembly, centre housing spares 1
1.3 Screw, low profile, cap head, socket, M6 x 16 mm long 4
1.4 Sleeve, pan bearing 1
2 R3-2185 Bearing f/516 head 1
3 R516-01 Assembly, base plate 1
3.1 Drag disc, adjust 1
3.2 Pan base spares assembly 1
4 R516-99 Assembly, brake knob with screws 1
4.1 R503-214 Assembly, brake knob 1
4.1.1 Screw, countersunk head, socket, M4 x 8 mm long 1
4.1.2 Knob, pan brake 1
4.2 Insert, pan brake knob 1
4.3 Shim, 8 mm ID x 14 mm OD x 0.30 mm thick 1
4.4 Spring, pan brake release 1
4.5 Friction pad, pan brake 1
4.6 Clamp plate, pan brake 1
4.7 Bolt, dome head, coach, M 6 x 20 mm long 1
5 R351-02 Ball casting with rod 1
5.1 Assembly, ball clamp 1
5.2 Grubscrew, slotted, M6 x 8 mm long 3
6 3330-35 Bowl clamp assembly 1
7 R501-57 Assembly, pad with spring 1
7.1 Spring, drag adjust shoe 2
7.2 Shoe, drag disc adjust 2
To Next Page
Loading...
