Vinten pro-touch Pro-10 System - Page 50

50
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.6 Leg Assembly (3819-11)
Item
No.
Part
No. Item Qty
1 3774-15 Bowl assembly (75mm) 1
2 3498-321 Leg Pivot Clamp 3
3 3498-338 Spherical Washer 6
4 M007-506 Screw, button head, socket, M6 x 20 mm long 3
5 J550-112 Cap, tube, dome type, to fit over 3.2 mm diameter 1
6 3498-322 Hook 1
7 3498-226 Leg Pivot Friction Ring 6
8 3498-229 Leg Pivot Washer. 6
9 3310-12 Strap assembly 1
3819-11 Leg assembly - replaceable parts as follows
10 M600-106 Washer, plain, light, M8 1
11 J532-076 Spring, compression, 0.625 in. free length, 0.480 in. OD x 0.500 in.
hole dia., 22.00 lbf/in. rate
1
12 3513-13 Upper clamp assembly 1
13 3392-205 Threaded insert (upper rear) 1
14 L101-026 Screw, self-tapping, pan head, pozidrive, M4 x 1/4 mm long, type bt 1
15 3819-901SP Centre leg tube assembly 1
16 M006-813 Screw, grub, dog point, socket head, M5 x 10 mm long 1
17 3770-213 Washer-Lower clamp 1
18 3770-18 Clamp shaft assembly (lower) 1
19 3770-17 Clamp cam follower 1
20 3770-13 Lower clamp assembly 1
21 3770-16 Two-stage foot assembly 1
22 M101-003 Screw, self-tapping, pan head, pozidrive, M4 x 25 mm long 1
23 3770-229 Bottom Clamp Knob (Two Stops) 1
24 M601-010 Washer, shakeproof, internal, M5 1
25 M006-515 Screw, button head, socket, M5 x 8 mm long 1
26 3770-206 Knob cap 1
27 3770-219 Top clamp cam insert 1
28 3770-14 Upper clamp knob assembly 1