Vinten Vision 250 E - Page 52

52
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.2 Vision 250 E Pan and Tilt Head - Main Assembly
Item
No.
Part
No.
Nomenclature Qty
1 M005-721 Screw, cap head, socket, M4 x 25 mm long 2
2 3465-203 Mechanism housing - cover 1
3 N600-010 Ball, steel, 1/8 in. dia. 1
4 J532-191 Spring, compression, 1.125 in. free length, 0.120 in. OD x 0.125 in.
hole dia., 5.60 lbf/in. rate
1
5 M005-808 Screw, grub, knurled cup point, socket head, M4 x 8 mm long 1
6 M801-006* Pin, dowel, 4 mm dia. x 10 mm long 1
7 3525-249 Centre lock shaft 1
8 3525-248 Centre lock knob 1
9 M701-035 'E'-Clip, standard, 6.00 mm shaft dia. x 0.70 mm thick 2
10 3525-273* Rubber Pad (small) 2
11 M005-714 Screw, cap head, socket, M4 x 20 mm long 1
12 M005-717 Screw, cap head, socket, M4 x 10 mm long 1
13 R900H129 'O'-Ring, 4.5 mm ID x 1.6 mm section, hardness 70 IRHD 1
14 — Tilt drag and tilt brake assembly (Fig 6.6) 1
15 J550-108 Cap, push-button for 0.100 in. dia. Plungers 1
16 M005-706 Screw, cap head, socket, M4 x 16 mm long 1
17 M005-710 Screw, cap head, socket, M4 x 35 mm long 1
18 3525-16* PCB assembly (Fig 6.8) 1
19 3465-276 Cover label 1
20 3525-266 Shield 2
21 3465-902SP* Mechanism housing/bubble assembly 1
22 P200-107 Bearing, ball, radial, 50 mm ID x 65 mm OD x 7 mm long, two
shields
2
23 M004-551 Screw, flanged, button head, pozidrive, M3 x 5 mm long 2
24 P605-010 Snap ring, external, bearing retention, 50 mm shaft dia. x 1.5 mm
thick
1
25 3525-275* Rubber Pad (large) 2
26 M005-722 Screw, cap head, socket, M4 x 30 mm long 2
27 3465-903SP* Right hand side plate assembly 1