Vinten Vision 250 E - Page 59

59
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.5 Vision 250 E Pan and Tilt Head - Pan Drag and Pan Brake
Item
No.
Part
No.
Nomenclature Qty
1 M006-704 Screw, cap head, socket, M5 x 16 mm long 2
2 M006-703 Screw, cap head, socket, M5 x 12 mm long 3
3 M006-740 Screw, low-profile, cap head, socket, M5 x 20 mm long 1
4 3465-203 Mechanism housing - cover (Fig 6.2) 1
5 3525-220 Pan drive shaft 1
6 3791-40 Extending pan drag knob assy, including: 1
7 3431-290 Drag knob plug 1
8 M005-710 Screw, cap head, socket, M4 x 35 mm long 1
9 P900-008 Ball, steel, 4 mm dia. 2
10 J532-067 Spring, compression, 25 mm free length, 3.50 mm OD x 2.71 mm ID,
1.123 N/mm rate
2
11 3431-309 Pan shaft washer 1
12 P003-004 Bearing, plain, plastic, 4.020 / 4.068 mm ID x 5.00 mm OD x 6.0 mm long 1
13 3525-12* Pan Drag assembly 1
14 M004-901 Screw, countersunk head, socket, M3 x 8 mm long 4
15 3525-230 Pan brake cover/PCB support 1
16 3790-215 Screw, pan encoder housing drive 2
17 3525-229 Pan brake spigot 1
18 3431-24 Brake knob assembly 1
19 3525-224 Pan brake shaft 1
20 3465-204* Outrigger machining (Fig 6.2) 1
21 3525-223 Pan brake actuator
22 3525-906SP* Pan brake kit
23 3465-902SP* Mechanism housing/bubble assembly (Fig 6.2) 1
24 M006-720 Screw, cap head, socket, M5 x 8 mm long 1
25 3525-264* Pin 1