Vinten Vision 250 E - Page 61

61
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.6 Vision 250 E Pan and Tilt Head - Tilt Drag and Tilt Brake
Item
No.
Part
No.
Nomenclature Qty
1 3465-23* Tilt Module assembly (with machined from solid drag housing) 1
2 M700-043 Circlip, internal, standard, 14 mm bore dia. x 1.00 mm thick 1
3 3431-328 Tilt drive shaft serial no. 0553 1
4 3431-286* Tilt shim - 20 thou A/R
3431-300* Tilt shim- 5 thou A/R
5 M806-014 Pin, coiled-spring, 3 mm dia. x 10 mm long, mdp 2
6 3465-204* Outrigger machining 1
7 3431-267* LED lens (Fig 6.8) 1
8 M005-735 Screw, low-profile, cap head, socket, M4 x 12 mm long 2
9 J532-067 Spring, compression, 25 mm free length, 3.50 mm OD x 2.71 mm ID,
1.123 N/mm rate
2
10 P900-008 Ball, steel, 4 mm dia. 2
11 3431-268 Drag knob boss 1
12 3431-290 Drag knob plug 1
13 M005-511 Screw, button head, socket, M4 x 8 mm long 1
14 3431-302 Drag knob washer 1
15 3431-266 Tilt drag knob 1
16 3465-261* Outrigger label 1
17 3431-24 Brake knob assembly 1
18 M005-734 Screw, low-profile, cap head, socket, M4 x 10 mm long 1
19 — Brake shaft assembly, comprising: 1
3431-331 Brake shaft 1
3431-242 Brake pad, secured with Permabond E31 1
20 R900H001 'O'-Ring, 7.5 mm ID x 1.6 mm section, hardness 70 IRHD 1
21 3431-329 Brake calliper with flats 1
22 3431-259 Tilt brake wedge 2