Vinten Vision 250 E - Page 68

68
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.9 Vision 250 E Pan and Tilt Head - Pan Bar
Item
No.
Part
No.
Nomenclature Qty
1 M006-113 Screw, countersunk head, pozidrive, M5 x 12 mm long 1
2 M606-001 Washer, nylon spacer, 5.3 mm ID x 18 mm OD x 3.8 mm thick 1
3219-90 Pan bar clamp assembly, comprising: 1
3 3219-318 Pan bar clamp 1
4 G249-007 Sleeve, insulation, head diameter 18 mm, body diameter 10.9
mm
1
5 M600-009 Washer, plain, heavy, M8 1
6 3219-75 Pan bar clamp knob assembly 1
7 L701-004 Circlip, external, standard, 0.312 in. shaft dia. x 0.025 in. thick 1
3219-86 Telescopic pan bar hd, comprising: 1
3219-87 Pan bar assembly (fixed), consisting of: 1
8 3219-229 Pan bar spigot (Vision 10) 1
9 3219-227 Pan bar sleeve 1
10 3219-314 Fixed tube 1
11 J550-074 Plug, tube-end, to fit 7/8 in. tube OD 1
3219-88 Outer tube assembly, consisting of: 1
12 3219-253 Hand grip (telescopic pan bar) 1
13 J550-093 Plug, tube-end, to fit 1 in. tube OD 1
14 3219-89 Outer tube & clamp assembly 1
15 3219-217 Shrink wrap sleeve 1
16 M500-082 Nut, M6, standard (hex), full 1
17 3219-299 Pan bar clamp (M6) 1
18 3219-267 Clamp lining (telescopic pan bar) 1
19 M600-007 Washer, plain, heavy, M6 1
20 K403-004 Knob, locking-key, female, M6 thread, 32 mm wide 1