Viola Systems Symphony

Questions and Answers

E
earl65Jul 26, 2025
How to troubleshoot a Viola Systems Symphony with no sound and the front panel LED is not lit?
- I
  Isaac AdamsJul 26, 2025
  If your Viola Systems Amplifier has no sound and the front panel LED is not lit, start by pressing the front panel power switch to ensure the unit is on. Check that the power lead is fully inserted into the AC input receptacle on the rear panel and plugged into a working AC wall socket. Test the wall socket with another device. Finally, inspect the mains fuses.
R
Raven SmithAug 3, 2025
What to do if my Viola Systems Symphony Amplifier has no sound but the front panel LED is lit?
- C
  Cory WilliamsAug 3, 2025
  If your Viola Systems Amplifier has no sound but the front panel LED is lit, several things could be the cause. First, ensure all signal wiring is correctly connected. Next, verify that all units feeding the amplifier are switched on. Also, check that the input selector and any other relevant switches are set appropriately. Make sure the signal source is actually playing, and that the pre-amplifier or signal source volume controls are set loud enough to hear.
D
Denise RussellAug 9, 2025
Why does my Viola Systems Symphony Amplifier keep shutting down?
- F
  Felicia RiveraAug 9, 2025
  If your Viola Systems Amplifier keeps shutting down, disconnect the inputs to both channels and also the speaker cables. Then, try to switch the amplifier on. If it starts but then shuts down, there may be a fault with the signal source or a short circuit in the speaker cables or speaker. Switch the amplifier off and reconnect one channel from the signal source. Switch the amplifier on. Switch the amplifier off and reconnect the other channel from the signal source. Switch the amplifier on. Switch the amplifier off and reconnect one of the speakers. Switch the amplifier on. Switch the amplifier off and reconnect the other speaker. Switch the amplifier on.
M
Matthew BrownAug 17, 2025
What to do if Viola Systems Symphony shuts down after reconnecting speakers?
- S
  Steven PopeAug 18, 2025
  If your Viola Systems Amplifier shuts down after reconnecting the speakers, first check the speaker cables for a short. If the cables appear to be OK, there may be a fault with the speaker.