Viola Systems Symphony - SPECIFICATIONS

Viola Symphony Manual Rev 1 15 of 15 9
th
September 2005
SPECIFICATIONS
Class of Output Operation: AB
2
Power Rating:
200W continuous average power into 8 ohms
20Hz to 20kHz, both channels driven at less than 0.25% THD
400W continuous average power into 4 ohms
20Hz to 20kHz, both channels driven at less than 0.5% THD
IM Distortion (SMPTE):
1W to 200W into 8 ohms <0.075%
1W to 400Winto 4 ohms <0.10%
THD: <0.1% @ 20 kHz/200 watts
Frequency Response:
1W into 8 ohms (10Hz - 20kHz) +/-0.15 db; 100k <-3 db
Power Bandwidth: 5 Hz to 100 kHz (-3dB points)
SN Ratio: -105 db at 1 kHz / 200W; C weighted
Gain: 26 dB
Input Impedance: 1M Ohm / 1M Ohm balanced
Inputs: Balanced - XLR and Fischer
Output Connections: Binding post for spade terminals
Power Consumption: Approximately 225W at idle. 1800W maximum
Weight: Amp lifier: 120 lbs. (55 kg)
Packed: 127 lbs. (57 kg)
Dimensions: Height including feet: 8 5/8”. (21.9cm)
Width: 17 5/8”. (44.8cm)
Depth including binding posts: 19”. (48.3cm)
Specifications are subject to change without notice.